Dongcheng(DCดีจริง) DZC45 สว่านโรตารี่ 2 ระบบ 45 มม. 1500W SDS Max

คุณสมบัติ

※ Due to continuing program of research and development, the specifications herein are subject to change without prior notice.

ADDITIONAL SAFETY RULES

1. Please read through the instructions and operation specifications carefully before use.

2. Wear a safety helmet (hard hat) and ear protectors when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.

3. Hold the tool firmly by both hands and always use the auxiliary handle.

4. Hold tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.

5. Check and ensure that the drill bit be correctly installed and secured before operation.

6. Under normal operation, the tool is designed to produce vibration. The screws can come loose easily, causing a breakdown or accident. Check tightness of screws carefully before operation.

7. In cold weather or when the tool has not been used for a long time, let the tool warm up for a while by operating it under no load. This will loosen up the lubrication. Without proper warm-up, hammering operation is difficult.

8. Always be sure to have a firm footing. Wear safety belt when using this tool in high locations and ensue no one is below.

9. Keep hands andthe other body parts away from the rotating parts.

10. Do not leave the tool running. Operate the tool only when hand-held.

11. Do not point the tool at any one in the area when operating. The bit could fly out and injure someone seriously.

12. Clean the vent often. The motor would suck up the dust and too much dust may cause electrical danger.

13. Do not touch the bit or parts close to the bit immediately after operation; they may be extremely hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

WARNING! MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

Function Features

Soft Start Device

Electronic control soft start device ensures that the tool runs smoothly when it starts.

Adjustment of the Rotating Speed

Under the mode of hammer drill, the speed can be controlled within 150-305r/min by the speed adjusting knob, which is convenient for the operator to choose the speed according to the material.

Constant Speed

The built-in electronic constant speed function enables the tool to keep a high rotating speed and blow output rate of under the condition of high load.

Power-off Protection

To avoid the damage caused by the sudden start, release the switch and press it again to restart the tool.

Double overload protection

The overload protection can make the bit stuck and idle the motor so as to prevent the tool from being burned out when it is with heavy load..

The electronic overload protection prevents the tool from being burned out by enabling the tool to stop voluntarily within a short time when it is with a heavy load and the overload protection doesn't work.

Edition 4 Nov., 2017

ข้อมูลสินค้า

Dongcheng(DCดีจริง) DZC45 สว่านโรตารี่ 45มม. 1500 วัตต์ SDS max

ประเภทสินค้า : สว่านโรตารี่

ยี่ห้อ : Dongcheng(DCดีจริง)

รุ่น : DZC45

ข้อมูลเทคนิค

• กำลังไฟเข้า   :   1,500W.
• ความเร็วรอบขณะหมุนเปล่า   :   0-305 rpm
• ระยะการเจาะคอนกรีต   :   45 mm.
• ความถี่การกระแทกสูงสุด : 1370-2700/นาที
• Impact Energy ：14.0J
• หัวจับดอก   :   SDS Max
• ความสามารถในการเจาะ สูงสุด : คอนกรีต Φ 45 mm.
• น้ำหนัก   :   8.2 Kg.